Before falling into ruin centuries ago, Von Koss Keep was once a functioning fortress of the Empire. Many of the soldiers that once loyally served the Imperial garrison were entombed in the catacombs beneath the keep's foundation, while others rest in the now overgrown battlefields surrounding it. When the Legion of the Infernal Skull rose to power and the vampires von Koss claimed the fortress for their own, these soldiers were resurrected and now form the The Red Guard. Though bound by necromantic magic, these undead warriors fight vigilantly to protect the keep as though they still remember their oaths sworn long ago.
Dimirti von Koss uses these skeletons as his personal retinue. Awakened by his dark invocations, fallen soldiers crawl out of the earth to join the Red Guard's ever growing ranks.
Converting the Red Guard
The Red Guard skeletons are constructed using the plastic Skeleton Warriors and Soldiers of the Empire kits from the previous edition. (You'll find that many of my tutorials feature older models, as I've been collecting for years. While you may not have access to the older kits, the conversion and painting techniques can still be applied to the newer models.)
I had built two 20-man units a few years ago, with the intention of adding more models to cap off each unit at 30. The 20-man skeleton units have served me well on the tabletop, becoming a staple in most army lists, and it's about time I followed through on my plan. In this tutorial, I'll take you through the process I use to assemble and paint these skeletons.
Assembly
It may appear that you would only be getting one unit out of two boxes, but with different combinations, you can stretch the parts further and still get two regiments-worth of models. Skeleton legs with an Empire torso, and Empire legs with a skeleton torso, for example. The arms and heads are the tricky part, because you want skeletal hands holding the weapons and a skull head to reinforce the unit's appearance as skeletons. Fortunately, most of us have plenty of spare weapon arms in our parts boxes, and skulls are not difficult to come by.
Below, you can see all the parts laid out to build two models. By using a combination of skeleton and Empire parts, you can create a unit that looks suitably armored, and has a definite Imperial flare. A similar technique could be used to make High Elf or Bretonnian-themed undead regiments.
The shields are from the classic Fighter Shield Sprue. The two horns are used to create a neck for the skull, since skeleton heads and Empire torsos would otherwise be joining socket-to-socket (and wouldn't work).
Before assembling anything, go through and clean all of the mold lines and distress the clothing and armor with cuts and divots. A dull hobby knife blade and pin vise are useful for creating all manner of pitting, tears, and scratches.
For the model on the right, it's a simple matter of gluing the torso and legs together. The legs of the model on the left prove a little more complicated, and uses the following technique for combining clothing with skeleton parts.
You are going to use the upper portion of the sleeve, and the lower portion of the skeleton arm. Clip away the red parts, as shown in the image. To easily create a secure and realistic-looking join, use a large (1.90mm is fine) pin vise bit to drill out the bottom of the sleeve. The skeleton arm can now sink into this hole, creating a more secure bond when glued together.
For the weapon arm, use the same technique. If you prefer to use the existing, weapons that the skeletons are armed with, that's fine. For my skeletons, I cut away the weapon and attached a sword from an Empire soldier. By scoring the parts and making sure the parts joined level and flush, I was able to attach them with super glue and no pinning.
Why go through all the trouble with the swords? I'm glad you asked! The new skeleton kits have nicely uniformed swords, but the old kit had a mix of flails, axes and swords. Skeletons with mixed weapons look like rabble. That's fine for for zombies, but skeletons in a Blood Dragon army should have a martial, disciplined appearance. The skeletons still wear their former uniforms and armor, and bear the same equipment.
To further complicate matters, I had already built my Grave Guard and equipped them all with swords from the skeleton kit. I didn't think it would be appropriate for skeletons to have weapons the same size as the Grave Guard, so the smaller swords from the Empire kits were the obvious choice.
You can see the difference in this side-by-side shot:
Attach the finished arms to the skeleton. To create the neck, glue the horn into the neck socket, and then clip off the pointed part. In lieu of the horns, thick plastic or brass rod will suffice, although you'll need to drill a hole for it to sink into. The fact that it doesn't have any visible vertibrae texture doesn't matter; In the end it should be mostly obscured by the head and collar.
Using the same technique from the sleeves, combine the pants and skeleton feet to resemble the skeleton on the left. If you are attaching a skeleton ribcage to the flat top of the pants, you'll need to add a little bit of "spine" so the torso doesn't appear unnaturally stunted. This is easily done by slicing the top of the pelvis and spine off of the skeleton legs with a very sharp hobby knife. (You only need about a 3mm thickness, here. If you have ever worked in a deli, you should have all the skill required to do this!) Glue this part onto the pants, and then attach the ribcage.
To complete the assembly, just attach their heads and shields!
Here is a shot of four skeletons on a regimental base before I attached their shields. The metal heads were left over from my Execution Guard Grave Guard unit, and the helmet in the middle was made by combining a skull with a classic Bretonnian knight's helmet. The dragon icon on top was cut from the metal Grave Guard champion's head.
The breastplates were sculpted with brown stuff putty using a press mold to transfer the armor detail onto a plain Empire torso. The straps were then sculpted around the back.
Here they are: Twenty skeleton warriors, ready to join their comrades in death and glory! I attached all the shields prior to painting (even on the regimental strips) to speed up the process and avoid spending time on parts of the miniature that would just end up being covered.
I super glued sand and a few tombstones to the bases before spraying them with black primer.
Painting
A note on the painting: Because I jump back and forth between P3, and old and new Cidatel colors, I've identified each color with its manufacturer or replacement color the first time it appears. (If you're using the GW comparison chart, note that Ushabti Bone, is not the same as the old Bleached Bone. Screaming Skull is a closer match. Thanks to Scott at GW Echelon Village for pointing that out.)
Step 1. Over black primer, begin by drybrushing up the base and the bone areas. Start with P3 Battlefield Brown, then P3 Gun Corps Brown, GW Snakebite Leather/ Balor Brown, and GW Bleached Bone/ Screaming Skull. Give the bones a layer of Bleached Bone/ Screaming Skull, and then wash the entire thing with a mix of Brown Ink and Snakebite Leather/ Balor Brown.
Carefully drybrush the bones with Bleached Bone/ Screaming Skull and then with a mix of P3 Menoth White Base and P3 Menoth White Highlight on the highest areas. Try your best to keep the drybrushing out of the recesses. If necessary, paint more of the brown wash into the recess, over the teeth, etc. Don't forget the skulls on the ground!
For a more detailed step by step description of the ground and bone painting, check out the Graveyard Bases tutorial.
Step 2. Painting the bone takes the most time, so the rest should go fairly quickly. Start by basecoating the clothing with a mix of P3 Thamar Black and GW Scab/ Khorne Red. This should be fairly dark to start with, but not quite black. Then, overbrush the clothes with successively light layers of the same mix until it's straight Scab/ Khorne Red on the highest areas (we're only talking about 3 levels, here). Finally, mix in a little P3 Skorne Red to add some highlights.
As when you were painting the bone, try to keep paint out of the recesses when drybrushing or overbrushing. If any recesses fill in, you can always apply a controlled, dark wash to recapture the shadow.
Step 3. For the shields, simply paint the undersides black (they should already be mostly black from the primer layer). Then paint the front of the shields the same color as the clothes. Using a large drybrush, stipple a little dirt on the bottom of the shields using a mix of Gun Corps Brown and Snakebite Leather/ Balor Brown. Drybrush this dirt mix on the bottoms of some of the pants legs, as well.
Step 4. Paint all the brown bits (leather straps, belts, and any visible sword hilts. Base coat them with Battlefield Brown, and then apply a highlight with Snakebite Leather/ Balor Brown.
Basecoat the tombstones with a dark mix of Thamar Black and P3 Ironhull Grey. Then, drybrush up with Ironhull Grey, and finish off the edges by adding a little GW Shadow Grey/ Fang Grey and P3 Morrow White into the drybrushing mix. Wash a little Brown Ink around the stones' bases.
During this step you should paint any black areas of the clothing, like patches, socks or sashes. Use Thamar Black and Shadow/ Fang Grey to apply a two-step basecoat and highlight similar to that used on the leather straps.
Step 5. Paint Catachan / Castellan Green around the base edge, and spray the miniature with Testors Dull Cote matte sealer.
I use Dull Cote on the models to eliminate the shine that ink washes create, and to help the colors "pop." Dull Cote kills the metallic sheen, though, so I spray it prior to painting the metals. Since summer is here, it's worth noting that if you spray Dull Cote outside and bring it inside into an air conditioned house, there is a good chance that it will frost up. So, leave the figures outside, in the garage, or on an open windowsill until they completely dry. Take care leaving plastic models (or even the plastic bases) in the sun, though!
Step 6. The final painting step is to finish off the metal. Basecoat the weapon hilts and helmet embellishments with P3 Molten Bronze and highlight with P3 Rhulic Gold. Basecoat the swords, armor, buckles, and helmets, and paint the cuts on the shields with P3 Pig Iron.
On the helmets, paint straight Scab/ Khorne Red between the banding. Then, shade all of the metal areas (including the cuts on the shields, bronze parts, and the red on the helmets) with a wash of Brown Ink.
Paint a line of GW Mithril Silver/ Runefang Steel along the edges of the blades.
Step 7. Finish off the figures by adding static grass to the bases, and send them forth to crush their foes!
When painting blocks of horde infantry like this, remember to keep it simple and quick. The overall appearance of the unit is more important than any individual model, so don't sweat any small mistakes or missed details. This is the reason that I paint the figures with their shields attached– I'm not tempted to spend too much time on the areas I can't reach with my brush. If the brush can't reach them, chances are they can't be seen on the table, either.
I hope you've found this guide useful and entertaining! Here are the completed Red Guard skeletons in all their glory:
Coming up, I'll show you how I make those banners.
0 Yorumlar